Expert review of the Franklin Whole Home battery and Home Power System

FranklinWH is a newer company in the U.S. home energy storage market, but it could soon be a household name The WH stands for Whole Home, and the company is all about whole home backup. FranklinWH currently offers a single energy storage system model it calls Franklin Home Power system, or FHP for short, and it’s been turning heads in the industry and the marketplace.

The Home Power System comes in two parts: an AC-coupled battery called the aPower and a smart load control system called the aGate. When the two are installed together, they have some serious functionality.

The FHP can do whole-home backup by switching off power-hungry appliances when necessary. It can connect to any existing solar inverter, start air conditioners up to 4 tons in size, and charge from solar, the grid, or a backup generator.

If you’ve been looking for a home battery storage system, you might be very impressed with the abilities described above. Not many batteries on the market can match what FranklinWH claims its FHP system can do.

Does the FHP live up to these claims? Read on to find out!

The components of the FranklinWH Power System

The FHP consists of three components:

• A 13.6-kilowatt-hour (kWh) lithium iron phosphate battery unit called the aPower

• A smart energy management unit called the aGate

• The FranklinWH smartphone app, which controls the smart circuits and allows users to customize their FHP system to their needs.

aPower batteries

The aPower battery comes with its own inverter in a very nice-looking box, with a sleek design and a grouping of LEDs on the front that indicate the state of charge. Having the inverter included means the aGate is an AC coupled battery, which connects to your home’s wiring only after the stored DC energy has been converted for use in your home.

One aPower battery unit weighs in at 408 lbs and measures 45.3” x 29.5” x 11.4”. It can be mounted on the wall or on the ground. The battery unit holds 13.6 kWh of lithium iron phosphate (LFP) battery cells. The unit can output 5,000 watts of continuous power and surge to 10,000 watts for 10 seconds. This is enough to start a 4-ton air conditioner.

Each additional aPower unit adds battery capacity and power output. For example, two units can output 10,000 watts continuously and surge to 20,000 watts, and three units can output 15,000 continuous watts and surge up to 30,000 watts. As many as 15 aPower battery units can be wired in parallel to a single aGate.

aGate smart energy management system

The aGate unit is where the battery meets the rest of the home. It has connections for the grid, the aPower battery, solar input, backup and non-backup loads panels, smart circuits, and a generator. The aGate can control all of your home’s appliances up to 160A, and can additionally manage the smart circuits to shut down certain loads when necessary.

There are two smart circuits inside the aGate, one 50A and one 80A. These can be connected to power-intensive appliances, EV chargers, or noncritical loads sub-panels and be set to automatically shut down if battery power is low in a grid outage situation through the app. You can also set schedules or manually control these smart circuits with the app.

The aGate controls battery charging and power flow in the home. It can be set to charge the batteries from solar, the grid, and even an AC backup generator. FranklinWH says the FHP can work with any existing solar inverter and accepts up to 80A of 240V output, which works out to about 19.2 kW. The wall-mounted aGate unit weighs 50 lbs and measures 31.5” x 21.7” x 6.3”.

One final selling point for the aGate is the ability to do “solar black start.” That means the FHP can operate completely independent of the grid using solar energy.

Essentially, the system will shut down if the battery gets too low during a power outage and there isn’t a backup generator available. The next morning as the sun comes up, the aGate will send a pulse signal to your solar inverter to check if it can produce enough power to start charging the battery. The aGate sends this pulse signal once per hour from 10 a.m. to 2 p.m. When it receives a positive response, the inverter will start up, the battery will start charging, and your home will be powered by your solar system.

The FranklinWH app

Using the FranklinWH app, owners can control how the battery charges and discharges. The battery can be set for self-consumption, backup standby, or load shifting, which means using backup power during peak usage times to save money under a Time of Use rate plan.

As mentioned above, the app also allows automatic scheduling of smart loads like EV chargers and other power-hungry appliances, along with manual control of these circuits during a power outage. During a grid outage, the aGate acts as its own wireless hotspot so you can still connect to the app and control the battery.

Finally, the app provides a real-time and historical display of energy generation, consumption, and battery use based on data from the aGate.

Cost and warranty

As of late 2022, the average wholesale price of the Franklin Home Power system is $15,000. Add about $2,500 to that number for installation costs, and you’re at $17,500 all in. For that price, you get one aPower and one aGate. Additional aPower units can be purchased for $11,500 wholesale, with probably $1,000 for installation, depending on your location and installer.

That said, FranklinWH is offering its installer partners different pricing and bonuses for selling a certain number of units, so you may find a better deal than the prices listed above. Also, your final cost is likely to be lower, considering the FranklinkWH battery qualifies for the federal clean energy tax credit.

For your money, you get all the functionality described above with a 12-year warranty, which covers defects in materials and workmanship as well as energy throughput. Specifically, FranklinWH says the aPower will retain at least 70% of its initial 13.6-kWh capacity by the end of the 12-year warranty or a minimum of 43 megawatt-hours (MWh) of throughput.

To put that into perspective, that means the aPower could be fully discharged and recharged 3,160 times before hitting its minimum throughput warranty. In order to get the full 12 years of coverage (4,383 days), you could discharge the battery an average of 9.8 kWh per day for the entire warranty period.

If the system suffers a defect within the warranty period, FranklinWH will repair the defective equipment or replace it with a new or refurbished battery.

How the FranklinWH energy storage solution matches up

Compared to other lithium-ion home batteries on the market, the FHP system offers more features and is more expensive from a dollars-per-kWh perspective. In general, true whole-home backup is very expensive, and only the FranklinWH FHP is designed to do it out of the box.

The Generac PWRcell system can also do whole-home backup as long as its modular battery cabinet is full with 18 kWh of batteries and paired with Generac’s PWRmanager load control system. And if you want true whole-home backup with the Tesla Powerwall, you’ll likely need at least two or three batteries, potentially each tied to their own sub-panel or connected to something like the SPAN smart electrical panel to ensure they can deliver enough power to the loads in your home.

Despite all this talk of whole-home backup, it’s important to note that none of the batteries described above are being marketed by their manufacturers for off-grid use, nor are they designed to provide backup to life-supporting systems or other medical equipment.

Here is a table with some comparisons between the FHP system and these other popular batteries:

Battery model	FranklinWH FHP	Generac PWRcell	Tesla Powerwall+
Average installed cost	$17,500 with 1 aPower battery unit; $11,000 for each additional	$11,500 for 9 kWh min. size; $18,500 for whole-home backup capability	$11,500 for one Powerwall+; $7,000 for each additional
Power connection	AC	DC or AC	AC
Capacity	13.6 kWh	9 - 18 kWh	13.5 kWh
Max. continuous output	5 kW	4.5 - 9 kWh	5.8 - 9.6 kW*
Peak power output	10 kW	6 - 12 kW	10 - 22 kW*
Round-trip efficiency	89%	96.50%/90%**	90%
Warranty	70% after 12 years or 3.16 MWh of throughput per kWh of storage	10 years or 2.52 MWh of throughput per kWh of storage	70% after 10 years, unlimited cycles***
Generator integration	Yes	Yes	No
Solar black start	Yes	Yes	No

<sub>Tesla Powerwall+ output depends on weather, solar system size, and whether the grid is up or down.
* PWRcell offers 96.5% round-trip efficiency when DC coupled, 90% when AC coupled.
*** Tesla’s Powerwall+ warranty terms vary depending on how the battery is used.</sub>

Exploring the numbers

As you can see from the numbers above, the FranklinWH FHP excels in some areas, like peak power output and warranty term. It’s also quite a bit more expensive on a dollars-per-kWh basis. But for people who need whole-home backup with generator integration, its ability to meet those needs without a lot of complicated and expensive electrical work is intriguing. Whether it’s worth it for you will depend on your specific needs and your tolerance for taking a risk on a relatively new company.

Unfortunately a simple comparison between batteries based on numbers alone isn’t possible. For example, the continuous and peak power output of the FHP increase by 5 and 10 kW, respectively, for each extra aPower unit added, up to 15 units. Similarly, each additional Powerwall+ added to a home increases the batteries’ ability to output power. The best way to determine which of these solutions is right for you is to work with a solar installer to make sure the system they offer will meet your needs.

About FranklinWH

FranklinWH Energy Storage, Inc. is a newcomer to the United States residential battery market. The company was founded in 2019 and is currently headquartered in San Francisco, CA. Before the FHP system, the company was mostly involved in creating power electronics for the utility-scale market. As of mid-2022, the company had about 150 R&D and product employees in Shenzen, China, and a team of 15 (and growing) in the United States, according to a solar industry webinar.

The company has received funding from venture capital firms like Sequoia Capital and is now in what you might call aggressive growth mode. The FHP has recently been approved for sale using Mosaic and Goodleap financing and is eligible for Hawaii’s Battery Bonus and California’s SGIP programs.

Bottom line: Should you consider the FranklinWH battery for your home?

If you’ve been in the market for a whole home backup solution, you’ve probably noticed there are very few choices that don’t involve a whole lot of wiring and tens of thousands of dollars. If you look at the FranklinWH FHP system that way, it seems positively elegant and affordable.

The functionality here is second to none in its price class, the tech is solid, and the company is doing the right things with certifications and getting the battery into the hands of installers. The concern here is it’s a relatively new product from a relatively new company, so you’ll have to trust that they’ll succeed and be around to support that 12-year warranty.

If that sounds like something you can live with, the FranklinWH battery gets our recommendation.